Error code · Body and airbags

B0012 — SRS: driver frontal deployment loop stage 1

Don’t put off the repair

For makes: Chevrolet, Cadillac, GMC

A fault code doesn’t yet mean the unit or sensor itself is faulty: often it’s the plug and connector leading to it.

Possible causes

What you can do yourself

  1. You can drive, but don’t put off the repair: the airbags may not deploy in a crash.
  2. Don’t test squibs or airbags with a multimeter and don’t take them apart: the airbag can deploy and injure you. Touch the connectors only with the battery terminal disconnected and after waiting several minutes. Don’t fit airbag “emulators”: there will be no protection in a crash.
  3. If a phone charger or USB adapter is plugged into the 12 V socket, unplug it: per a GM bulletin such chargers upset the airbag circuit measurement. Then the code is cleared with a scanner to see whether it comes back.
  4. If the code appeared after the steering wheel or its buttons were replaced or the steering column was repaired, check the clock spring and its connectors (only with the terminal disconnected).
  5. A scanner often shows the code with a suffix (B0012-0D, B0014 04): 04 means an open circuit, 0D resistance above normal, 0E below normal. This helps you know where to look.
  6. After the repair the code won’t go away by itself: it is cleared with a scan tool.
OOleg’s tip: check the connector

Often the cause is simple — there is no contact in the connector (plug). Look at the connector from the back: remove the rubber seal and you will see whether a wire is corroded or has come off completely. Corrosion shows up as green deposits. Ideally, gently pull each wire towards you one at a time: a sound wire stays in place, while a corroded one simply comes off — it needs to be repaired.

Unplug and inspect connectors with the ignition off.

GM steering wheel airbags are dual-stage: the 1st and 2nd stages are two squibs in one airbag. This is the GM meaning (Chevrolet, Cadillac, GMC). On other makes this number means something else: if your car isn’t made by GM, change the make at the top.

Source: GM PIC5702, RQ13-002, 17-NA-103, 21-NA-005, PIT5564A (static.nhtsa.gov)

The explanation comes from the error code reference in the AvtoElektrik PRO app.

Need a mechanic’s help?

Couldn’t fix it yourself? Oleg, an auto electrician, does computer diagnostics and repairs: he comes out anywhere in Almaty or sees you at his workshop.

Want to figure it out yourself?

Oleg’s course “Car computer diagnostics with a scan tool”: how to hook up a scanner, read codes and live data, and use them to find the cause. The first lessons are free.

Scan tool diagnostics course →

Nearby codes

All codes in Body and airbags →

Who keeps this reference

The reference is kept by Oleg Dmitriev, an auto electrician from Almaty with 26 years of experience: computer diagnostics of cars and trucks, repair of control units (ECUs). Can’t find the cause? Message him.