A fault code doesn’t yet mean the unit or sensor itself is faulty: often it’s the plug and connector leading to it.
Possible causes
- Low voltage: a flat battery or corroded terminals
- The power steering ECU ground: a corroded or loose bolt
- The power steering (EPS) fuse or its socket
- The power steering unit software (per GM bulletins some faults are fixed by an update)
- The power steering motor or its connector
- The power steering ECU
What you can do yourself
- The power steering may switch off — the steering will get very heavy, especially at low speed. If this happens while driving, hold the wheel with both hands, slow down and stop in a safe place.
- Check the battery, terminals, ground and the power steering fuse: at low voltage the assist weakens or switches off.
- The code often stays after a flat battery or a jump start: charge the battery and clear the code.
- Check the power first: per GM bulletins some of these faults go away after the ground is tightened, the battery charged and the unit’s software updated.
- Don’t clear the codes before diagnosis: they tell the technician what happened.
Stop and don’t drive on if:
- The red brake light is on, or the brake pedal feels soft or sinks
- The steering became very heavy, or the car pulls to one side when braking
OOleg’s tip: check the connector
Often the cause is simple — there is no contact in the connector (plug). Look at the connector from the back: remove the rubber seal and you will see whether a wire is corroded or has come off completely. Corrosion shows up as green deposits. Ideally, gently pull each wire towards you one at a time: a sound wire stays in place, while a corroded one simply comes off — it needs to be repaired.
Unplug and inspect connectors with the ignition off.
This is the GM meaning (Chevrolet, Cadillac, GMC). On other makes this number means something else: if your car isn’t made by GM, change the make at the top.
Source: GM PIT5213B, PIT5063C, PI1294B, 16-NA-065 (static.nhtsa.gov)
The explanation comes from the error code reference in the AvtoElektrik PRO app.